DoepferMCV4 MIDI to CV Gate Interface

Doepfer MCV4

Doepfer’s MCV4 is a four mode MIDI to CV gate interface. The unit is ideal for controlling vintage synthesizers and Eurorack modular setups. The unit features MIDI IN and MIDI THRU inputs, as well as two dual CV outputs and a single Gate output. 

MCV4 Features

• Compact Four Mode MIDI to CV/GATE Interface
• CV1 Voltage Range (Normally for VCO CV Pitch Control): 0 - +5V, 8 Bit Resolution (Equivalent to 1/4 semitone resolution)
• CV2, CV3, CV4 (For Voltage Control of other Functions e.g. VCF Frequency, Loudness, and other modulations)
• MIDI control of CV1: note on/off with pitch-bend, 1V/octave characteristic
• MIDI control of CV2 monophonic after-touch
• MIDI control of CV3 velocity and/or volume (controller #7)
• MIDI control of CV4 velocity and/or any controller (setting of the controller number via learn button)
• Pitch-Bend is used for CV1 generation with 1/4 semitone resolution
• Gate Output type can be selected via jumper inside the device between Voltage Trigger (+5V or power supply voltage) and S-Trigger (Switched Trigger)
• MIDI Channel and Reference Note for CV1=0V adjustable via learn button
• Different Assign Modes for CV1 (Highest Note, Last Note, Reference Note)
• Retrigger ON/OFF while playing legato
• Gate/Trigger Polarity Normal/Inverted
• Two 1/4" Stereo Jack Sockets for CV1/2 and CV3/4
• 1/4" Mono Jack Socket for Gate/Trigger
• Learn button with LED for adjusting MIDI channel, reference note for CV1, controller for CV4
• Optical display of Gate/Trigger via LED
• Non-volatile Memory for Parameter Settings