TASCAMCelesonic US-20x20 USB 3.0 Audio Interface

Tascam Celesonic US-20x20

The Tascam Celesonic US-20x20 is a 20-in/20-out USB 3.0/2.0 audio interface that features three switchable modes, acting as an interface, mixer, or standalone mic preamp. Featuring eight Ultra-HDDA mic preamps on combination XLR/TRS with phantom power, plus optional high-z inputs for guitar and bass, it has plenty of room for your inputs. Outputs include 10 TRS outputs and two headphone outputs. Additional digital inputs and outputs are available on S/PDIF and S/MUX.

The built-in DSP processor allows you to apply EQ, reverb, and compression to incoming audio, saving you time when mastering. It has recording quality up to 192kHz/24-bit resolution for crystal clear, studio-quality recording. You can also route any input to any output with the digital patchbay, so no need to tear out all the connections—handle it digitally. Save and recall up to 10 scenes, great for optimizing workflow when switching between recording and mixing. Integrate your MIDI instruments into your session with the built-in MIDI input and output.

And not only does the Celesonic US-20x20 work with your computer—it is also compatible with iPads and other iOS devices. Whether you need a mixer, mic preamp, or interface, the Celesonic US-20x20 has everything you need.

Celesonic US-20x20 Features

• 20x20 USB audio interface
• Can also act as a mixer or mic preamp
• Eight Ultra-HDDA mic preamps with +48V phantom power
• 10 TRS outputs
• Up to 192kHz/24-bit resolution
• USB 2.0 or 3.0
• Built-in DSP processor with EQ, compression, and reverb
• Low latency monitoring
• Digital patchbay allows for any input to be sent to any output
• S/PDIF and S/MUX digital inputs and outputs
• Store and recall up to 10 scenes
• BNC word clock input and output